1300 276 642
www.bromic.com/refrigeration
6
4. INSTALLATION
Locating the Cabinet
Ensure the following instructions are observed as this is vital for proper and trouble-free operation.
• Do not install the cabinet outdoors.
• Locate the appliance in a dry and well ventilated place.
• The unit must be positioned on a level surface.
• Do not install in the vicinity of heating radiators or other heat sources.
• Do not install the appliance where it is exposed to direct sunlight.
• Keep the air intake and outlets free of obstructions (for Warm showcase only).
Before Operating
• Remove all the packaging material before using the appliance.
• Start the appliance only if it has been installed as described.
Power Supply
• The appliance must not be plugged into a multiple outlet power board. (for Warm
showcase only)
• The appliance is supplied with a flexible power cord fitted with a 3-pin plug.
• The socket used must be properly earthed and fuse/RCD protected.
• See the rating label inside the cabinet for supply voltage, frequency and current draw.
• Power cable is rated 70°C. It is recommended that the cable should not come into contact
with parts over 50°C.
• Do not turn off power before consulting the person responsible.
• Mark the power source clearly, so the cabinet is not unplugged or turned off accidentally.
