background image

1300 276 642

www.bromic.com/refrigeration

4

•  Read all instructions before installing or using this appliance

•  Retain this manual for future reference

•  Use this appliance only as described in this manual. Any other use not recommended by the 

manufacturer may cause fire, electric shock or injury. 

•  Improper installation, adjustment or alteration and failure to follow the warnings and instructions in 

this manual could result in severe personal injury, death or property damage

•  The manufacturer is not responsible for any damage that could happen from improper use. The 

manufacturer emphasises that this appliance should be used in a responsible manner and that all 
procedures, warnings, and safety instructions contained in this booklet be followed strictly. 

•  Check the appliance for damage. Do not operate a damaged unit.

•  Check for damage to the appliance regularly. If damage to the appliance is suspected, discontinue 

use immediately and contact the supplier or qualified person to repair.

•  This appliance is not intended for use by people (including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision 
or instruction concerning use of the appliance by a person responsible of their safety.

•  Keep packaging material out reach of children

•  Children should be carefully supervised to ensure that they do not play with the appliance

•  Do not attempt to alter the appliance in any manner.

•  Please pay attention to the maximum load limit when filling the shelves.

•  All work on electrical equipment must be carried out by a qualified and licenced technician only.

•  Do not perform maintenance until the appliance has been turned off and power disconnected.

•  Never detach any cover except where specifically instructed in this manual. Doing so might expose 

live electrical parts.

•  Do not operate the appliance with panels, covers or guards removed.

•  Keep the air intake and outlets free of obstructions.

•  Do not use the appliance outdoors.

•  If the supply cord becomes damaged, it must be replaced by an authorised service agent or similarly 

qualified person in order to avoid a hazard.

•  If the appliance has not been used, or will not be used for a long period of time, disconnect  

power supply.

•  Ensure the appliance has adequate ventilation.

2. IMPORTANT NOTES AND WARNINGS

Summary of Contents for 3736300













Reviews: