B101784-4-0712
Page 9
C
Art
A
SSEmbly
18. Continue grill head assembly as stated in the Owner’s Manual
that came with your grill head before continuing on to step 19.
19. Slide Heat Shield into Cart Assembly. The tabs on the Heat
Shield slide into the top rear louvers on the Rear Panel. Slide
Heat Shield over the knurl nut on the Left Panel. Swing Heat
Shield into place. See Figure 12.
20. Secure Heat Shield to the Stabilizing Bracket with
four 10-16 x 1/2 self drilling screws. See Figure 12.
KNURL NUT
Figure 12
Attention: The included flex hose and coupler MUST be used
with PSCB carts. Follow steps 21 to 22 to install.
21. Attach the included flex hose to valve on control panel.
22. Attach the included coupler and your regulator hose (LP) or
supply line (LP or NAT) to the flex hose. See Figure 13.
FLEX HOSE
COUPLING
REGULATOR HOSE (LP)
OR
SUPPLY LINE (LP OR NAT)
VALVE
Figure 13
23. Slide Grease Drip Tray into the slots on the underside
of the Heat Shield. See Figure 14.
Note: Grease Drip Tray must be emptied periodically.
Note: Grease Drip Trays are not required for Q3X Series grills.
However, they can be left in place as a backup tray.
Figure 14
24. Secure a 1/4-20 x 1-1/4 screw to the knurl nut in the Left Panel
side. Slide the Tank Retainer Bracket on the screw and secure
it with a lock washer and wing nut. See Figure 15.
Figure 15
