background image

B102268-1-0615

Page 32

before Cooking

Before cooking on a grill for the first time, burn off any oil residue 

from the manufacturing process.

1.  Open the grill lid.

2.  Light grill burner.

3.  Burn on HI for ten minutes.

4.  Close the lid and burn on HI for an additional ten minutes.  

5.  The grill is now ready for use.

Preheating

Before cooking on a gas grill, allow the grill to preheat on HI for 

5 minutes with the lid closed.

Preheating  uses  very  little  fuel,  provides  better  flavor,  and  

provides more consistent cooking times.

OPERATION - PROPANE AND NATURAL GAS GRILLS

Electrical Accessories

If an electrical accessory (e.g. rotisserie) used on your grill  must 

be electrically grounded in accordance with local codes or, in the 

absence of local codes, with the National Electric Code, ANSI/

NFPA 70.  In Canada, the electrical accessory must be electri-

cally grounded in accordance with the applicable section of the 

current Canadian Electrical Code, CSA C22.1.

Any electrical accessory should be equipped with a three-

prong (grounding) plug and plugged into a properly grounded 

three-prong receptacle or wall outlet.  Do not cut or remove the 

grounding prong from the plug.  

 

WARNING

I

f an extension cord is required, use only a three-prong cord 

and plug into a properly grounded receptacle as described 

above.  Do not expose an electrical accessory to water.  Avoid 

using any electrical accessory in wet weather as it may present 

a shock hazard.  

 

WARNING

K

eep any electrical cord and fuel supply hose away from all 

heated surfaces.

Summary of Contents for P3SX-4









































Reviews: