Broil King H3PK2N-3, Assembly Instructions Manual

Page: 40 / 48

B102527-0-0219 Page 40
TROUBLESHOOTING
Although we have attempted to ensure that your grill will operate properly and
satisfactorily, sometimes problems do arise. The following troubleshooting guide lists several
possible problems and their probable cause and solution.
Do not repair or replace any part of the grill unless specifically recommended in this manual.
All other service should be referred to a qualified technician.
Problem Cause Solution
Burner will not light Spider webs in venturi tubes Clean venturi tubes.
See Maintenance Section.
Out of gas Natural model, turn on gas at
source.
Gas injector not inserted in venturi
tube
Realign/engage gas injector
with the venturi tube.
Clogged gas injector Remove gas injector from gas
control assembly and clean.
Misalignment of collector box and
burner
Position electrode properly.
Clean collector box.
Dead battery Replace with AA Alkaline
battery.
Inadequate grill
temperature
Poor combustion Adjust air shutter.
Misalignment of venturi tube and
gas injector
Realign/engage gas injector
with the venturi tube.
Inadequate gas pressure Contact gas supplier for
assistance.
Flames blow out Cold grill Preheat grill at least 5 minutes
on HI with the grill lid closed.
Misalignment of burner tube and
gas injector
Realign/engage gas injector
with the burner tube.
Poor combustion Adjust air shutter.
Extreme wind Turn or shield grill.
Yellow flames Air shutter improperly set Open air shutter.
Spider webs in venturi tubes Clean venturi tubes.
See Maintenance Section.
Seasoning salts on burner Clean by washing burner with
mild detergent.
Oil film on burner Allow burner to operate on HI
for 10-15 minutes.