BC300E Broilchef LP Gas Grill
Owner’s Manual
11
Step 10 (Assemble the grill body to the cart)
a) Put the grill body (O) on the top of cart assembly.
b) Align the two holes on the top of cart left side panel
with the two holes on the left side of body assembly.
c) Insert one bolt (AA), one spring washer (EE) and one
flat washer (DD) into each pre-drilled hole. Tighten
bolts by hand until secure.
d) Repeat the procedure for the right side of body
assembly with right side panel.
e) Go back and tighten all bolts using the screwdriver
provided.
Attention:
Unpack the regulator/hose assembly (located
underneath the firebox) prior to assembling
the grill body to the cart, and push the
regulator/hose into the hole on cart left side
panel when go ahead to this step.
Step 11 (Side burner assembly)
a) Align the holes on side burner (S) with the holes on middle of left side
table (P).
b) Insert one bolt (CC), one flat washer (FF), one spring washer (NN) and
one nut (MM) into each pre-drilled holes. Tighten bolts by hand.
c) Go back and tighten all bolts using the screwdriver provided.
Step 12 (Left side table assembly)
a) Align the holes on left side table front support (Q) and back
support (R) with the holes on the bottom side of left table (P).
b) Insert one bolt (BB), one spring washer (EE) and one flat
washer (DD) into each pre-drilled holes. Tighten bolts by
hand.
c) Go back and tighten all bolts using the screwdriver and
wrench provided.
