GPT1813G
Instruction Manual
Guide d’utilisation
6
Hardware listed above is not scaled to exact size.
(A screwdriver is required on assembly and is included for your convenience).
Assembly Instructions
Remove all contents from the carton packaging. Make sure all parts
are present before attempting assembly. Once the grill is fully
assembled, go back and check to make certain all the bolts are
secure. Tighten again using the screwdriver provided if necessary.
Estimated Assembly Time: 20 minutes.
AA: 1 PC
BB: 14 PCS
CC: 14 PCS
Wrench
M5 × 10 Bolt
M5 Lock Washer
DD: 14 PCS
EE: 14 PCS
FF: 1 PCS
Flat Washer
M5 Nut
M6 x 7 Bolt
GG: 7 PCS
HH: 7 PCS
II: 6 PCS
M6 Lock Washer
Flat Washer
M6 Nut
JJ: 1 PC
KK: 2 PCS
LL: 2 PCS
Screw Driver
R Pin
Lid Pin
Hardware Contents
Step 1
a) Align the holes on the right back side of body assembly (L) with the
holes on the lower hinge (D).
b) Insert one bolt (BB) into the pre-drilled hole, tighten with one flat
washer (DD
)
one lock washer (CC)
and one nut (EE)
c) Repeat the procedure for the left back side of body assembly.
d) Go back and tighten all the bolts using the screwdriver
provided.
