Broderson IC-280-A, Accompaniment To The Installation, Operation And Maintenance Manual

Page: 8 / 75

1-4
SECTION 1
DESCRIPTION AND SPECIFICATIONS
The IC-280-A is a self-propelled Industrial Crane designed for material handling and maintenance
and repair of equipment, with special features of self-loading cargo decks, 4-wheel steer, and
2-wheel drive. The basic unit consists of a chassis and hydraulic boom assembly. The chassis
includes a frame, four hydraulic independently controlled outriggers, engine, torque converter,
powershift 4-speed transmission, front planetary drive/steer axle and rear steer-only axle, fuel tank,
hydraulic tank, control station, power steering and dual power brakes. The hydraulic-powered
continuous rotation turret includes a proportional 4-section telescopic boom, hydraulic boom
elevating cylinder, hydraulic boom telescope cylinder and hydraulic powered hoist. Rated Capacity
Limiter (RCL) is standard.
IC-280-A:
Capacity of 40,000 pounds (18,144 kg) at a 6-foot (1.8 m) load radius. Horizontal reach of 59
feet 9 inches (18.21 m) and vertical reach of 70 feet 6 inches (21.5 m).
General:
Length:
Overall 26 feet 11 inches (8.2 m)
Chassis 15 feet 9 inches (4.8 m)
Width: 7 feet 10 inches (2.39 m)
Height:
Overall 8 feet (2.47 m)
Deck 47 inches (1.19 m)
Wheelbase: 100 inches (2.54 m)
Ground Clearance:
Chassis 13 inches (33 cm)
Minimum 11 inches (28 cm)
Angle of Approach: 25 degrees
Angle of Departure: 24 degrees
Outriggers:
Spread: Out & Down 14 feet (4.27 m)
Mid & Down 10 feet 8 inches (3.25 m)
Penetration 8 inches (20 cm)
Boom Movement:
Rotation Continuous
Elevation 0 to 75 degrees
Telescope 40 feet 9 inches (12.42 m)
Boom Speeds:
Rotation 1.4 RPM
Elevation 26 seconds
Telescope 75 seconds