Comfort-Tilt
31
3. Check the function of the cylinder and repeat steps 3 & 4 until the cylinder functions
properly.
4. Tighten the lock nut loosened in step 1.
Removing and Installing the Cylinders
1.
Remove the 5/16” mounting bolt from the end of the cylinder (requires 2 x 1/2”
wrenches).
2. Loosen the lock nut located on the stem of the cylinder by the actuator.
3. Wind the stem of the cylinder out of the actuator.
4. Wind the stem of the new cylinder into the actuator.
5.
Reinstall the 5/16” mounting bolt.
6. Adjust the cylinder as per the above adjustment instructions.
