Comfort-Tilt
23
The leg rests can be adjusted to length using an M4 hex key. The bolt is removed, and the length
can be extended or shortened via sliding the lower tube inside the upper tube. There are various
hole options to select from for reinserting the bolt.
The foot plate can be moved fore and aft at the base of the leg rest, as well as adjusting the foot
angle, using the same fastener set. The clamping mechanism must be unbolted using a 10 mm
wrench and an M4 hex key in order to reposition the plate placement fore and aft. The bolt and
nut only need to be loosened to adjust the angle.
