e.
Battery Ignition Components.
The battery ignition components are used to ignite the cutting rod
by means of an electric arc.
1)
Lightweight Battery.
The Lightweight Battery (PC/BISLW) contains a rechargeable 12-volt,
sealed, lead acid (gel-type) battery. The battery provides DC power (through AWG #6 welding
cables) to both the torch and the striker plate assembly. A dead short spark is all that is
necessary for igniting the cutting rod.
PC/BISLW LIGHTWEIGHT BATTERY
2)
Striker Plate Assembly.
The Striker Plate Assembly, shown with leather sheath, consists of a
replaceable insulated copper grounding plate with battery cable. The 15’ long cable is fitted
with a set of electrical quick-connects allowing it to be shortened to 5’ long for use in a back-
packed mode.
3)
Torch Power Cable.
The Torch Power cable has electrical quick-connects fitted at both ends
for attachment to the torch assembly and the lightweight battery. The 15’ long cable is fitted
with a set of electrical quick-connects allowing it to be shortened to 5’ long for use in a back-
packed mode.
TORCH POWER CABLE
STRIKER PLATE AND
LEATHER STRIKER HOLDER
f.
Harness Assembly.
The back harness assembly is a high strength, lightweight plastic (SCUBA-
type) frame with padded adjustable shoulder straps. Shoulder straps and chest strap have quick
release buckles. The frame also has nylon cylinder retaining straps. It allows the oxygen cylinder to
be carried in an up-right position on the operator's back.
