Brocade Mobility RFS9510 Controller Installation Guide
17
53-1002918-01
Chapter
4
Controller Management Interface
Using the Mobility RFS9510 controller management interface
Once the Mobility RFS9510 Controller is installed and powered on, complete the following to
access the management functions on the controller:
1. Connect one end of an Ethernet cable to one of the ports on the back of the Mobility RFS9510
Controller, and connect the other end to a computer with a working Web browser.
2. Set the computer to use an IP address between 192.168.0.10 and 192.168.0.254 on the
connected port. Set a subnet /network mask of 255.255.255.0.
3. Once the computer has an IP address, point the Web browser to: https://192.168.0.1/ and the
following login screen will display:
4. Enter the default username
admin
in the
Username
field.
5. Enter the default password
admin123
in the
Password
field.