IronWare Software Release 02.7.03a for Brocade BigIron RX Series Swtches
Release Notes v 1.0
Page 6 of 40
Enhancement
Descriptions
Described in…
Syslog update
The System Log has been updated as follows:
•
Separate buffers for static and dynamic logs
•
Entries in the static log buffer are cleared at
reset or reload, while entries in the dynamic
log are preserved
•
Log buffer size cannot be changed. The log
buffer size is set at 3800 lines
•
A
show logging
command is now available
at the monitor level for Active and Standby
Management Processors
Book
:
BigIron RX Configuration Giuide
Chapter
: Using Syslog
Feature support
Below is a list of all the features supported on the BigIron RX switches. See Unsupported features, for
features not supported.
Supported features
Category
Feature description
System level Features
•
Cisco Discovery Protocol (CDP)
Allows you to configure a Brocade device to intercept and display the
contents of CDP packets. This feature is useful for learning device and
interface information for Cisco devices in the network.
•
CLI Logging
•
Denial of Service (DoS) protection
Protection from SYN attacks
Protection from Smurf attacks
•
Foundry Discovery Protocol (FDP)
Enables Foundry devices to advertise themselves to other Foundry devices on
the network.
•
High Availability
OS Layer 2 Hitless Software Upgrade
