Brocade Communications Systems Fabric OS v6.4, Documentation Update

Page: 35 / 70

Fabric OS Documentation Updates 23
53-1002063-09
perfShowFilterMonitor
5
perfShowFilterMonitor
Displays all filter-based performance monitors.
Synopsis perfcshowfiltermonitor [ slotnumber /] portnumber [ interval ]
Description Use this command to display counters for all filter-based performance monitors on the specified
port.
Notes This command requires a Brocade Advanced Performance Monitoring license.
This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and
GbE ports.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
slotnumber For bladed systems only, this operand specifies the slot number of the port
on which the monitor is to be cleared, followed by a slash (/).
portnumber Specifies the number of the port on which the monitor is to be displayed,
relative to its slot for bladed systems. Use switchShow for a list of valid ports.
interval Specify an interval, in seconds (5 or more). This operand is optional; if
omitted, this command displays cumulative counts.
Examples To display filter monitor traffic on a port at an interval of every 6 seconds:
switch:admin> p erfshowfiltermonitor 2/5 6
0 1 2 3 4 5 6
#Frames #CMDs #CMDs #Frames #Frames #CMDs #CMD
---------------------------------------------------------------
0 0 0 0 0 0 0
26k 187 681 682 682 494 187
26k 177 711 710 710 534 176
26k 184 734 734 734 550 184
26k 182 649 649 649 467 182
26k 188 754 755 755 567 184
26k 183 716 716 717 534 183
26k 167 657 656 655 488 167
26k 179 749 749 749 570 179
26k 164 752 752 752 588 164
26k 190 700 700 700 510 190