Brocade DCX-4S QuickStart Guide
13 of 20
Publication Number: 53-1001192-03
ATTENTION
Since the blades in the DCX-4S are installed horizontally, the usual top-to-bottom orientation becomes a left-to-right
orientation.
Connect the cables from the left (top) connectors (ICL 1) of the CR4S-8 blades in the first chassis to the right (bottom)
connectors (ICL 0) of the CR4S-8 blades in the second chassis.
Similarly, connect the cables from the right (bottom) connectors (ICL 0) of the CR4S-8 blades in the first chassis to
the left (top) connectors (ICL 1) of the CR4S-8 blades in the second chassis.
NOTE
The cables can cross between the slot 3 CR4S-8 blade on the first chassis and the slot 6 CR4S-8 blade on the second
chassis as long as the left-to-right (top-to-bottom) rule is followed.
FIGURE 5
Inter-chassis link (ICL) cable
ICL 1
ICL 0