background image

Brocade Adapters Troubleshooting Guide

71

53-1001582-01

Statistics

3

rpwwn

Displays the remote port’s PWWN.

Quality of Service statistics (HBAs only)

Use HCM and BCU to display quality of service (QoS) statistics for individual ports. You can display 
statistics for fabric login (FLOGI) activity, exchange link parameter (ELP) activity, and received QOS 
registered state change notifications (RSCNs).

Displaying QoS statistics through HCM

Use the QOS Statistics dialog box to display QoS statistics.

1. Launch the HCM.

2. Select the base adapter port from the device tree window.

3. Click Monitor > Remote Port Statistics > QOS Statistics.

Displaying QoS statistics through BCU

Use the qos --stats command to display remote port statistics.

vport --stats <port_id> vpwwn

where:

port_id

ID of the port for which you want to display rport statistics. This could be the 
PWWN, port hardware path, or user-specified port name. This could also be 
the adapter-index/port-index. For example, to specify adapter 1, port 1 you 
would use 1/1 as the port identification.

Virtual port statistics 

Use HCM and BCU to display logical port statistics for fabric discovery (FDISC) activity, logouts 
(LOGO) activity, NPIV support, number of fabrics online and offline, and fabric cleanups.

Use these statistics to isolate NPIV login problems. Following are examples of what to check if 
virtual devices are not listed in the name server:

If FDISC sent and FDISC accept statistics do not match, the fabric or switch may not be ready 
for data transmission. This is normal as long as it does not persist. If it does persist, there may 
be a problem in the fabric or a protocol issue between the adapter and fabric. Note that in this 
case FDISC retries also increase.

Check the No NPIV support statistics to verify that NPIV is supported and enabled on the 
switch.

Displaying virtual port statistics through HCM

Display statistics by selecting Monitor > Statistics > Virtual Port Statistics.

OR

Right-click a virtual port on the device tree and select Virtual Port Statistics.

Summary of Contents for CNA 1010

















































































































































Reviews: