To connect the machine to the power supply, proceed as follows:
1) Ensure that all electrical leads & cables (including supply leads) are maintained in a good condition &
away from sharp objects. All leads should be replaced if cut, sliced or damaged in any way.
2) Insert the power plug into the socket, while ensuring that the
mains voltage is compatible
for which the
drill unit is operating at.
3) Inspect that the power switch on the main box is closed & set to
OFF
position
4) To prepare the machine for operation, release the
STOP/EMERGENCY STOP
button by twisting the red
mushroom button. To activate the drill, engage the green
START
button.
5) Check that the spindle rotary direction & change the phasing if required; clockwise rotation observing top-
down on top of the motor pulley
6) If all of the above procedures have been carried out correctly, the drill should now be operational
Brobo Group
3M Drill
is now ready for use.
Chapter 3 provides a detailed description of the various features of the drill & its operating cycles
