INST
ALLA
TION
AND USE & CARE INSTR
UCTIONS
INST
ALLA
TION
6
9. Finish ceiling, remove mask,
then install grille.
Remove mask from housing. Squeeze grille springs
and insert into slots in housing.
7. Install blower.
Re-install blower. Secure blower with 2 screws from parts
bag and plug blower into black receptacle. Plug in humidity-
sensing control.
3. Remove old fan.
Enlarge ceiling opening (if necessary) to 9¾-inches
(parallel to joist) by 10½-inches (perpendicular to joist).
Leave ductwork and wiring in place.
1
2
4. Fold mounting ears flat against
housing.
RETROFIT
CAUTION
• Make sure that the wiring inside of
the housing does not interfere with
re-installation of the blower.
8. Install housing mask.
Place mask into housing
opening to
prevent drywall
spray and
construction dust
from damaging
blower.
Push grille up against ceiling.
Leav
e this mask in place t
o pre
vent
constr
uction dust, dr
ywall spr
ay, or paint
from damaging inside of pr
oduct.
REMO
VE MA
SK BEFORE
INST
ALLING GRILLE.
Laissez ce masque en place pour empêcher
la poussièr
e de constr
uction, le plâtr
e ou la
peintur
e, etc.
d’endommager
l’intér
ieur du pr
oduit.
ENLEVEZ CE MA
SQUE
AVANT
D’INS
TALLER LA GRILLE.
Deje est
a cubier
ta en su lug
ar par
a evit
ar
que pol
vos de constr
ucción, r
ocíos de y
eso
o pintur
a dañen el int
erior del pr
oduct
o.
QUITE LA CUBIER
TA ANTES
DE INS
TALAR LA REJILLA.
99352432A
