MODELS QP430SS • QP436SS • QP442SS
Page 8
SERVICE PARTS
KEY NO. PART NO. DESCRIPTION
1
97018567 7” Round Duct Plate (includes mounting hardware)
2
97018257 User Interface Assembly Black (includes interface,
nameplate, mounting hardware)
3
99528259 Nameplate, Black
4
97018568 Capacitor Kit (includes wire nuts, mounting screw)
5
97018227 Light Panel RH Stainless
(includes mounting hardware)
6
97018205 Filter Kit for 30” (2 per bag)
97018206 Filter Kit for 36” (2 per bag)
97018207 Filter Kit for 42” (3 per bag)
7
97018569 Blower Wheel (includes spring clip)
8
97018570 Motor Kit (includes motor, isolators,
mounting hardware)
9
97018571 Damper / Duct Connector (includes mounting
hardware)
10
97018231 Light Panel LH Stainless (includes mounting
hardware)
11
97017731 Lamp Socket (includes lamp socket, wire nuts,
mounting screws)
12
97018233 Lamp Socket Bracket
13
97018572 Bottom Pan 30” (includes mounting hardware)
97018573 Bottom Pan 36” (includes mounting hardware)
97018574 Bottom Pan 42” (includes mounting hardware)
14
97018260 Circuit Board
15
97018262 Transformer (includes mounting hardware)
16
97018575 Vertical Diverter
17
97018582 Rubber Bushing
*
97017735 Parts Bag
*
99526707 Suction Cup Tool
*
97018252 Heat Sensor
*
97018253 Fuse
*
97018261 Ribbon Cable Kit (contains 3)
*
V05921
50W Halogen GU10 Bulb
* Not shown
Order replacement parts by PART NO. - not by KEY NO.
LAMP SOCKET
BRACKET
SCREWS
LIGHT
PANEL
WARRANTY
One Year Limited Warranty
Broan-NuTone warrants to the original consumer purchaser of its products
that such products will be free from defects in materials or workmanship
for a period of one (1) year from the date of original purchase. THERE ARE
NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
During this one year period, Broan-NuTone will, at its option, repair or replace,
without charge, any product or part which is found to be defective under normal
use and service. THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT
LAMP STARTERS, TUBES, HALOGEN AND INCANDESCENT BULBS, FUSES,
FILTERS, DUCTS, ROOF CAPS, WALL CAPS AND OTHER ACCESSORIES FOR
DUCTING. This warranty does not cover (a) normal maintenance and service
or (b) any products or parts which have been subject to misuse, negligence,
accident, improper maintenance or repair (other than by Broan-NuTone), faulty
installation or installation contrary to recommended installation instructions.
The duration of any implied warranty is limited to the one year period as
specified for the express warranty. Some states do not allow limitation on how
long an implied warranty lasts, so the above limitation may not apply to you.
BROAN-NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-
NUTONE’S OPTION, SHALL BE THE PURCHASER’S SOLE AND EXCLUSIVE
REMEDY UNDER THIS WARRANTY. BROAN-NUTONE SHALL NOT BE LIABLE
FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF
OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states
do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights, which vary from
state to state. This warranty supersedes all prior warranties.
To qualify for warranty service, you must (a) notify Broan-NuTone at the
address or telephone number below, (b) give the model number and part
identification and (c) describe the nature of any defect in the product or part.
At the time of requesting warranty service, you must present evidence of the
original purchase date.
Broan-NuTone LLC, 926 W. State Street, Hartford, Wisconsin 53027
www.broan.com 800-558-1711
Rev. 08/2007
99527577B
To change the depth of bulb sockets:
1. Remove bottom pan (See Step 5).
2. Remove 2
Light Panel Screws
and
Light Panel
. Set
screws aside.
3. Loosen 2
Screws
holding
Lamp Socket Bracket
to
Light Panel
.
4. Adjust socket/bracket to desired depth.
5. Re-tighten screws securely.
6. Re-attach light panel and bottom pan.
