10
17. REINSTALL FRONT PANEL AND WIRING COVER
18. CONNECT WIRING
(ALL MODELS)
!
WARNING
Risk of electric shock. Electrical wiring must be done by qualified personnel in accordance with all applicable
codes and standards. Before connecting wires, switch power off at service panel and lock service disconnecting
means to prevent power from being switched on accidentally.
Connect cable using provided wire connectors.
Connect wires as follows: BLACK to BLACK, WHITE to WHITE and GREEN
or BARE wire under ground screw. DO NOT FORGET TO CONNECT
THE GROUND.
CAUTION
Take care not to pinch wiring when reinstalling the front panel and the wiring cover.
Carefully reassemble the front panel to the power pack by aligning the tabs with their corresponding slot. Using a Robertson or a Phillips
no. 2 screwdriver, secure the front panel to the power pack using its both retaining screws (
A
) previously removed in step 8. Reassemble
the wiring cover using its both retaining screws (
B
) previously removed in step 8. Plug the motor(s) (one or two, depending on model) to
the front panel.
HD0365
A
B
HD0371
HE0059
A
HO0260
Position the power pack below the installed custom hood. Insert the house wiring cable through the wire clamp previously
installed in step 9. Tighten the wire clamp to secure the cable.
