INST
ALLA
TION,
USE & CARE INSTR
UCTIONS
INST
ALLA
TION
15
WIRING
WARNING
Risk of electric shock . Electrical wiring must be
done by qualified personnel in accordance with all
applicable codes and standards . Before connecting
wires, switch power off at service panel and lock
service disconnecting means to prevent power from
being switched on accidentally .
1 . Using appropriate wire nuts (not included), connect house
power cable to unit wiring: BLACK to BLACK, WHITE to
WHITE and GREEN or bare wire to GREEN ground screw
(FIG . 29) .
2 . Reinstall the electrical cover in the unit; ensuring the bottom
tabs are inserted in their embossed location . Secure in
place using its retaining screw (FIG . 30) .
CAUTION
Take care not to pinch wires while reinstalling wiring
cover .
INSTALL THE FILTER(S)
Ducted Installation
Reinstall the grease filter(s) .
Non-Ducted Installation
PM400SS unit only:
Attach the non-ducted filter (included
with the HARKPM21 non-duct kit) to the back of the
grease filter using clips (provided with non-ducted filter) .
To order a new non-ducted filter, use service part number
S99010464 .
BBN2243SS and BBN2303SS units only:
Attach
the non-ducted filters (included with the HARKBN24
or HARKBN30
non-duct kit) to the back of the grease
filters using clips (provided with non-ducted filter) . To
order new non-ducted filters, use service part number
S99010464-124 for BBN2243SS and S99010464-130
for BBN2303SS model .
!
HE0432
WHITE WIRE
BLACK WIRE
HOUSE
POWER
CABLE
FIG. 29
GREEN
GROUND
SCREW
HD1379
FIG. 30
TABS
