2
FILTER
RETAINER
TABS
FILTER
SWITCHES
The fan and light are each controlled
by a rocker switch. The light switch has
two positions, “ON” and “OFF”. The fan
switch has three positions - “HIGH”,
“LOW” and “OFF”. ( “OFF” is the middle
position.)
SCREWS
FAN
ASSEMBLY
Remove filter. Re-
move two screws
holding motor bracket
to range hood, and
unplug fan assembly.
Be careful not to allow
fan assembly to drop
when screws are re-
moved.
FILTER
Remove aluminum fil-
ter by turning filter re-
tainer to one side. Fil-
ter should be washed
once a month in a hot
detergent solution.
Aluminum filters are
dishwasher safe.
When installing filter,
make sure that filter
slides under retaining
tabs on back of fan
housing. Turn filter re-
tainer so that arrows
on retainer point to-
ward front and back of
hood.
WARNING
ALWAYS DISCONNECT ELECTRIC
POWER BEFORE SERVICING
RANGE HOOD.
CLEANING
Clean your hood with a mild detergent suitable for painted
surfaces. DO NOT USE ABRASIVE CLOTH, STEEL
WOOL PADS OR SCOURING POWDERS.
Fan assembly may be vacuumed. Fan assembly is per-
manently lubricated, and never needs oiling.
