Repeat8-NANO
4 / 17
rev. 1.1
Owner Information
•
Operating Manual
Please read this manual. If you call for technical support, we will assume that you have already done
so. Study the operating manual carefully in order to familiarise yourself with the device and its
operation. The operating manual contains important information on proper use of the device.
It cannot be guaranteed that this operating manual will not contain typographical mistakes or
misprints. The operating manual is regularly revised and updated.
Modifications, which serve the purpose of technical improvement of the device, may be carried out
without prior notification
.
•
Transport and Shipping
Always ensure careful handling of the device. The device should be transported and shipped in
shock-absorbing transport cases. If these are not available, we recommend well-padded packaging
such as the coated carton in which the device was delivered.
•
Operational Environment
This device can be used in E1, E2, E3, E4, or E5 environments (as listed below) according to the
harmonized European standards EN55103-1 and EN55103-2 “Electromagnetic compatibility –
Product family standard for audio, video and audio-visual and entertainment lighting control apparatus
for professional use”
E1-Residental
E2-Commercial and light industrial
E3-Urban outdoors
E4-Controlled EMC environment e.g. broadcast and TV-studio
E5-Heavy industry
The product is intended for the use in moderate climate.
•
Ventilation
Install the device in accordance to the operating manual. Allow for sufficient space around the units
and make sure to allow for air circulation near device. Do not operate the device close to heat
emitting equipment, such as power-amplifiers. Leave sufficient space (minimum
½
RU) between the
device and any heat emitting devices housed in the same rack.
A BroaMan Repeat8-NANO devices can be stacked up to 4 devices when operating standard 5V
PSU originally delivered by BroaMan. When 12V 3
rd
party PSU is used up to 2 devices can be
stacked.
It is recommended to use Power Supply Unit delivered with the product. BroaMan takes no
responsibility for incorrect generic PSU usage.
•
Water and Moisture etc.
To prevent fire or shock hazard do not expose the device to direct sunlight, dust, water or rain during
operation or storage.
Please note:
Stack up to 4 devices with the original PSU (up to 2 devices with generic PSU).
Ensure air circulation around the devices.
