User Manual
BritePort 8012-G1
36
Click Start -> Shutdown -> select Restart -> Yes. If warm reboot is unsuccessful,
shut off power to the computer and turn on after waiting for a few seconds.
6) The Web browser does not connect to the BritePort Configuration page
Cause
You may not be using the correct IP address or Subnet Mask.
Solution Try the following:
❑
Make sure that your telephone line has been activated for the DSL service.
❑
In the URL field (Address field) of your Web browser, make sure that you have typed
the correct IP address: 192.168.1.1.
❑
Check your Subnet Mask:
1. Click Start -> Settings -> Control Panel. In the Control Panel, double-click the
Network icon. In Windows 2000, you also need to double-click the Local Area
Connection icon to see the “Local Area Connection Properties” dialog box.
2. When the “Network” dialog box similar
to Figure B-1 appears, click the
Configuration tab. Under the “The
following network components are
installed” list, click your Ethernet card
to highlight it, for example, TCP/IP-
>PRO/100+ Management Adapter.
Click the Properties button.
Figure B-1