PD series QIG
1
Notes:
1.
Please check all peripherals according the list before installation. To make
sure that the whole unit was not damaged and lost during shipping process. If
you encounter any problem, please contact your dealer.
2.
Before installation, make sure all peripherals and computers have been
turned off.
3.
This product required front and rear mounting brackets. Pre-configure the
deep of the rack to find the best rear bracket kits for your usage.
4.
The standard rear bracket kits are for 420~830 mm PD-115 / PD-117
(480~895 mm - PD-119) as below figure,contact your dealer if you need
more longer rear bracket.
5. Reliable grounding of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to
the branch circuit.
