Broadrack Mars series User Manual Download

Page: 40 / 40

Mars Series User Manual

PC boot up, or if the PC boot up faster then the KVM switch, the PC miss

the DDC (Data Display Channel) information that causes the VGA

resolution output mismatch with the monitor’s.

In this case, please turn off the PC wait few minute then turn on again.

Certifications

FCC

This equipment has been tested and found to comply with Part 15 of the FCC

Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference

This device must accept any interference received. Include interference

that may cause undesired operation.

This equipment is in compliance with the requirements of the following

regulations: EN 55 022: CLASS B.

RoHS

All contents of this package, including products, packing materials and

documentation comply with RoHS.

Summary of Contents for Mars series









































Search results

Summary of Contents for Mars series

Reviews:

Related manuals for Mars series

Brands by name

Popular brands

Broadrack Mars series, User Manual

Search results

Summary of Contents for Mars series

Reviews:

Related manuals for Mars series

Brands by name

Popular brands