Broadconnect IP Office 1120E, Installation Manual

Page: 17 / 34

1100/1200 SIP Installation Page 17
Issue 04c (Friday, November 25, 2011) IP Office Release 8.0
IP Office Configuration: Enable SIP Phone Support
2.3 File Server Settings
You can use the system's memory card or a custom option as the source for the files used by the 1100/1200 Series
phones. The memory card is the default source.
Checking the File Server Setting
1. Using IP Office Manager, receive the configuration from the telephone system.
2. Select System.
3. Select the System tab.
4. Check the Phone File Server Type setting. The settings are used as follows.
·
Phone File Server Type: Default = Memory.
For phones using the telephone system as their DHCP server, the DHCP response includes the addresses of the
HTTP and TFTP file server from which the phones should request files. The setting of this field controls which
addresses the system uses in that DHCP response.
For 1100/1200 Series phones, the Phone File Server type should be set to Memory Card or Custom.
Phone File
Server Type DHCP Response uses...
HTTP Source TFTP Source
Custom HTTP Server IP Address TFTP Server IP Address
Memory Card LAN IP Address LAN IP Address
Manager LAN IP Address Manager PC IP Address
TFTP Server IP Address: Default = 0.0.0.0 (Broadcast).
This address is used in DHCP responses if the Phone File Server Type is set to Custom. This is not used for
1100/1200 phone installation so leave set to 0.0.0.0.
·
HTTP Server IP Address: Default = 0.0.0.0 (Disabled).
This address is used in DHCP responses if the Phone File Server Type is set to Custom. This is not used for
1100/1200 phone installation so leave set to 0.0.0.0.
·
Manager PC IP Address: Default = 0.0.0.0 (Broadcast).
This address is used when the Phone File Server Type is set to Manager. This is not used for 1100/1200
phone installation so leave set to 0.0.0.0.
·
Avaya HTTP Clients Only: Default = On.
For 1100/1200 Series phones this setting should be off.