SA-S500 Series
5
Security Analytics
Quick Start Guide
Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume
any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. (2020.12.18, 11:59:40)
3. Inspect the installed slide rails:
Verify the slide rails are even and installed at the same
level in the equipment rack.
Make sure the slide rails are free of defect and damage.
Make sure there is no debris in the slide rails.
Extend and retract the slide rails to verify smooth
operation and slide-stop operation.
Install the Appliance into the
Equipment Rack
To install the appliance in the equipment rack and verify
slide-rail operation:
1. Align the chassis rails attached to the appliance with the
slide rails in the rack and slide the appliance half-way
into the rack.
2. Press the release tabs on the chassis rails to slide the
appliance all the way into the rack.
3. Slide the appliance out of the rack, far enough to access
the rack screws. Fully tighten the M6 rack screws
securing the slide rails to the rack.
4. Verify the slide-rail operation:
Press the release tabs on the chassis rails to lock and
unlock the appliance in place.
Push and pull the appliance to verify smooth movement
across the entire slide range.
Carefully pull out the appliance all the way to verify the
slide-stop functionality.
5. Gently push the appliance all the way into the rack and
tighten the captive thumbscrews on the rack ears to
prevent the appliance from sliding out of the rack.
6. Verify the appliance is securely installed in the
equipment rack.
7. Reconnect the cables as documented in
and verify the appliance is functioning as
in
Section 3 — Power On the Appliance and Verify LEDs
7 — Next Steps
If your Security Analytics system includes external
storage, install the storage arrays per the instructions in
the
SA-J5300 Quick Start Guide
or
SA-SM-48T Quick
Start Guide
, available at:
For additional configuration instructions for SA-S500
appliances—including cabling to storage arrays, and
RAID array settings for Capture and Indexing—see the
SA-S500 Configuration Guide
, available at:
Locking tab
Symantec Technical Support
For Symantec technical support, case management,
licenses, and product downloads, go to
Security Analytics Help and Documentation
For Security Analytics help, in the web UI select
Settings > Help >
[language].
For Security Analytics software documentation, go to
and type “Security” in the
search field, then click
Security Analytics
.
Appliance Documentation
For Symantec appliance documentation, go to
and type “Appliances” in the
search field, then click
Hardware Appliances
.
