Broadcom BCM91125F, User Manual

Page: 15 / 20

User Manual BCM91125F
02/18/04
B ro a d c o m C o r p o r a t i o n
Document 91125F-UM100-R Switches Page 9
S
WITCHES
Figure 6 shows the positions of switches numerically. Compare Figure 6 ’s number callouts with a description
of each switch in Table 4 .
Figure 6: Switch Callouts
Table 4: Switch Descriptions
Board ID Function Default
SW2 Cold reset asserted when the button is pressed NA
SW3 NMI (GPIO 8) asserted when the button is pressed NA
SW4 8-position DIP switch, used for board configuration 0b01000010
dip[8] = GPIO[15] 0b0
dip[7] = System byte order (1 = big endian; 0 = little endian) 0b1
dip[6:1] = BCM1125H SW config[5:0] 0b000010