Broadcom ASG-S200, Quick Start Manual

Page: 6 / 6

ASG - S200, ASG - S400, ASG - S500
6
Advanced Secure Gateway
Quick Start Guide
Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume
any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. (2021.08.24, 13:07:44)

Attach the two outer rails to the rack, extending the rails
as necessary to fit the rack. Secure the front and rear
brackets with two M6 rack screws each. Do not yet fully
tighten the rack screws.

Fully tighten the side-mounting screws, three per side,
securing the rear brackets to the front brackets.

Inspect the outer rails, making sure they are installed at
the same level in the rack and free of defects, damage,
and debris. Verify the rails extend and retract smoothly
and stop at the slide-stop.
5. Install the chassis into the 4-post equipment rack ( d ):

Align the inner rails attached to the appliance with the
outer rails in the rack and slide the appliance half-way
into the rack.

Fully tighten the M6 rack screws securing the outer rails
to the rack.

Press the release tabs on the inner rails and gently
slide the appliance all the way into the rack.

Tighten the captive thumbscrews on the appliance’s rack
ears to prevent the appliance from sliding out of the rack.
6. Reconnect the cables as documented in Connect Cables
and verify the appliance is functioning as in Power On the
Appliance and Verify LEDs .
See below for support and additional documentation.
Symantec Technical Support

For Symantec technical support, case management,
licenses, and product downloads, go to:
support.broadcom.com/security
Advanced Secure Gateway Software Documentation

Go to
techdocs.broadcom.com
and type “asg” in the
search field, then click Advanced Secure Gateway .
Appliance Documentation

S Series WebGuide (Maintenance and Upgrades)
techdocs.broadcom.com/sseries

S200 Series Safety and Compliance Guide
techdocs.broadcom.com/s200

S400 Series Safety and Compliance Guide
techdocs.broadcom.com/s400

S500 Series Safety and Compliance Guide
techdocs.broadcom.com/s500