15
If two or more boxes have the same designation, then the system will not operate correctly.
Accessing the Doghouse and configuring the BOX designations is mandatory in multi-box
installations!
Note:
When multiple AudioFetch boxes are ordered to work together on the same network,
they will be pre-configured for you and this procedure will not be necessary.
To configure the boxes in a multi-box installation:
1.
Decide how you want the channels from each box to be ordered by the App (which
box’s channels display first, second, third, etc.).
2.
Use the Doghouse Utility to find/display all of the boxes on the network.
3.
Access the Doghouse for the first box (You want the App to display this box’s channels
first), navigate to the
MULTI-BOX SETUP
page and use the drop-down selector to
select “BOX A”, the new setting is saved automatically.
4.
Access the Doghouse for the second box, navigate to the
MULTI-BOX SETUP
page
and use the drop-down selector to select “BOX B” (new setting automatically saved).
a.
NOTE: Each box has its own Doghouse, you must access each box’s
Doghouse separately.
5.
If a third box is present: access the Doghouse for the third box, navigate to the
MULTI-BOX SETUP
page and use the drop-down selector to select “BOX C”
6.
If a fourth box is present: access the Doghouse for the fourth box, navigate to the
MULTI-BOX SETUP
page and use the drop-down selector to select “BOX D”
7.
Continue this procedure for any additional boxes present.
A maximum of 32 boxes are supported in a multi-box system.
To assist in setup, the Doghouse
MULTI-BOX SETUP
page contains a link to detect/display info
about other boxes present on the LAN. Click the link, and then a notification page will appear
for about 5 seconds while the other boxes are being detected. Then the
MULTI-BOX SETUP
page will display again with the list of boxes filled out. See the example below which shows
the detection results for a 3-box system.
Summary of Contents for AudioFetch FETCH12
Page 30: ...30 ...
