e-mail:
voice:
360.854.9559
fax:
866.783.1742
3
Universal 4.1 MLR Installation and Operation Manual
INTRODUCTION
INTRODUCTION
Thank you for your purchase of a BROADCAST TOOLS® UNIVERSAL 4.1
MLR/SERIAL transparent four inputs, single output switcher/router (referred to as the
UNIVERSAL 4.1 MLR/SERIAL throughout this manual). We’re confident that this
product will give you many years of dependable service. This manual is intended to
give you all the information needed to install and operate the BROADCAST
TOOLS® UNIVERSAL 4.1 MLR/SERIAL.
SAFETY INFORMATION
Only qualified technical personnel should install the UNIVERSAL 4.1 MLR/SER-
IAL. Any attempt to install this device by a person who is not technically quali-
fied could result in a hazardous condition to the installer or other personnel or
damage to the UNIVERSAL 4.1 MLR/SERIAL or other equipment. Please ensure
that proper safety precautions have been taken before installing this device. If you
are unfamiliar with this type of equipment, please contact a properly qualified
engineer to handle the installation and setup of the UNIVERSAL 4.1 MLR/SER-
IAL. Broadcast Tools, Inc., is unable to support NON-Broadcast Tools software,
hardware or NON-Broadcast Tools computer/hardware/software problems. If you
experience these problems, please research your hardware/software instruction
manuals or contact the manufacturers technical support department.
WHO TO CONTACT FOR HELP
If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment. If you would like
more information about BROADCAST TOOLS® products, you may reach us at:
Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284-1503 USA
Voice: 360.854.9559
Fax:
866.783.1742
Internet Home Page: www.broadcasttools.com
E-mail:[email protected]
THANK YOU FOR CHOOSING
BROADCAST TOOLS® BRAND PRODUCTS!
WEBSITE:
Visit our web site for
product updates and
additional information.
