e-mail:
voice:
360.854.9559
fax:
866.783.1742
3
Smart Relay 4 G2 Installation and Operation Manual
INTRODUCTION
INTRODUCTION
Thank you for your purchase of the Smart Relay 4 G2 Four Channel Smart GPIO
Converter, which we will refer to throughout the manual as the Smart Relay 4 G2.
We are confident this product will give you many years of dependable service. This
manual is intended to give you all the information needed to install and operate the
Broadcast Tools® Smart Relay 4 G2.
SAFETY INFORMATION
Only qualified technical personnel should install the Smart Relay 4 G2. Any attempt
to install this device by a person who is not technically qualified could result in a
hazardous condition to the installer or other personnel or damage to the Smart Relay
4 G2 or other equipment. Please ensure that proper safety precautions have been
taken before installing this device. If you are unfamiliar with this type of equipment,
please contact a properly qualified engineer to handle the installation and setup of
the Smart Relay 4 G2. Broadcast Tools, Inc., is unable to support NON-Broadcast
Tools software, hardware, or NON-Broadcast Tools computer/hardware/software
problems. If you experience these problems, please research your hardware/software
instruction manuals, or contact the manufacturers technical support department.
WHO TO CONTACT FOR HELP
If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment. If you would like
more information about BROADCAST TOOLS® products, you may reach us at:
Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284-1503 USA
Voice: 360.854.9559
Fax:
866.783.1742
Internet Home Page: www.broadcasttools.com
E-mail:[email protected]
THANK YOU FOR CHOOSING
BROADCAST TOOLS® BRAND PRODUCTS!
CAUTION!
Broadcast Tools®
Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condition
could result due to failure.
NOTE:
This manual should be
read thoroughly before
installation and operation.
WEBSITE:
Visit our web site for
product updates and
additional information.
Broadcast Tools is a Veteran Owned Business
Designed, Assembled and Supported in WA State, USA
