e-mail:
voice:
360.854.9559
fax:
866.783.1742
12
Relay Sentinel Installation and Operation Manual
SETUP
“I/O Setup” Web Page
Relay selection drop-down:
Allows for the selection of each relay.
Relay Label:
Used to identify each relay.
Alarms ON:
This box is checked to enable alarms when the relay is ON.
Alarms OFF:
This box is checked to enable alarms when the relay is
OFF.
Email Addresses:
The boxes labeled 1 thru 8 allows the user to select up to
eight different alarm email addresses when enabled.
Log Device:
This box is checked to enable the logging of each relay.
Default State:
This setting allows you to set the default state of each relay
control. The factory default setting is OFF for all relays.
Sync Pulse:
When checked, the relay will close at the minute and sec-
ond programmed each hour.
NOTE:
By enabling the ON and/or OFF monitoring and NOT enabling an
email box, the device will log the events, but not send an email. If the device is exiting a
OFF alarm condition, then the email addresses used will be those notified when the OFF
alarm condition was entered.
NOTE:
After any item has been changed, you MUST press the “Save Settings” button for
your changes to be saved.
WEBSITE:
Visit our web site for
product updates and
additional information.
