5
In order for the setting to take effect the unit must be power cycled for at least 5 seconds.
Once the unit is confirmed on the desired IP address load the SCA APP supplied on the
accompanying CD ROM onto a computer. Once installed you can start the app by clicking on the
EXE file. Send it your desktop for convenience.
Once the APP starts you will see the following screen:
It is possible to have up to 5 SCA generators collocated or at other sites under management from
the same APP. You can give each unit a name by entering it in the space allowed.
Click OPEN on the desired generator presumably Unit 1 if you are only setting up one generator
chassis. The screen below will appear:
