background image

 

1

 

 

VI. Warranty

 

   Broadcast Devices, Inc. products are warranted against failure due to faulty materials or workmanship 
for a period of one year from the date of shipment from Broadcast Devices, Inc. dock. The warranty 

covers repair or replacement of defective parts at the factory, provided the unit has been returned prepaid 
by the user. All shipments to the factory shall have affixed to the outside of the container a return 

authorization number obtained from the factory. The above warranty is void if the unit has been modified 
by the user outside of any recommendations from the factory or if the unit has been abused or operated 

outside of its electrical or environmental specifications. If customer conducted field tests suggest that the 
unit may be faulty, whether or not the unit is in warranty, a full report of the difficulty should be sent to 

Broadcast Devices, Inc. factory. The factory may suggest further tests or authorize return for factory 
evaluation.  Please email: 

[email protected]

 

 

   Units sent to the factory should be well packed and shipped to Broadcast Devices, Inc. – Check 

www.broadcast-devices.com

 for current shipping address. Remember to affix the R.A. number to the 

outside of the carton. Any packages received without such R.A. number will be refused. Note: freight 
collect shipments will also be refused. When the unit has been received, inspected and tested, the 

customer will receive a report of the findings along with a quotation for recommended repairs, which are 
found falling outside of the standard warranty. Units returned for in-warranty repairs, which are found not 

to be defective will be subject to an evaluation and handling charge. In-warranty units will be repaired at 
no charge and returned via prepaid freight.  

 

   Out-of-warranty units needing repair require a purchase order and will be invoiced for parts, labor, and 
shipping charges. 

 

   When ordering replacement part, always specify A) Part Description, and Quantity; B) Date of 

Purchase, Where Purchased; C) Any Special Shipping Instructions. Always specify a street address, as 
shipping companies cannot deliver to a postal box.

 

   Broadcast Devices, Inc. is not responsible for any other manufacturer’s warranty on original 

equipment. Nor are we responsible for any failure, damage, or loss of property that may occur due to 
the installation or operation of our equipment outside of recommended specifications. 

 

   Broadcast Devices, Inc. reserves the right to change materials, specifications, and features from 
time to time. 

www.broadcast-devices.com 

 

 

Tel. (914) 737-5032    Facsimile: (914) 736-6916 
 
Email: 

[email protected]

 

 

Summary of Contents for SCA-200











Reviews: