14
8-Port DC Power Manager User Manual (PS-8DC-5V/12V/24V/48V)
WEB GUI CONTROL
(1)
Power In
: Displays the voltage, current, and wattage of the unit’s main power supply.
(2)
Power Out:
Displays the voltage, current and wattage of each of the 8 individual power
outputs.
(3)
System Temperature:
Displays the unit’s temperature as measured at 3 locations inside
the case on the PCB.
(4)
System Fan:
Displays the current state of 2 external fans (optional) including individual
fan RPM, and the current fan speed thresholds, if auto mode is enabled.
Device Settings
This tab provides controls for all 8 power output ports as well as control over the optional
external fans’ speed and temperature thresholds.
(1)
Power Out:
This section provides control over each individual power output. The outputs
may be turned on, turned off, and renamed.
(2)
Fan Setting
: This section provides controls for any connected fans. When Auto Fan Mode is
enabled the fan speed will be controlled based on the three user-defined
temperature thresholds and speed selections. The preferred fan speed at each
threshold is also user configurable. If Auto Fan Mode is disabled, the fan speed
can be set as a static percentage of maximum power. If two fans are connected
to the unit, both will follow the same settings.
Note
: The highest of the three System Temperature measurements is used to determine which
Auto Fan Mode speed (low, middle, or high) is active when Auto Fan Mode is enabled.
