BCI Mini-12G - SDI
User’s Manual
Miniature Fiber Optic 12Gb/s -SDI Digital Video Transport System
Broadata Technical Support, [email protected]
11
11
If you have any problems or concerns, regarding the installation,
make sure that you have taken the proper steps to ensure a proper
power connection. Otherwise, feel free to contact us for any
questions you may have.
3.0 OPERATION
After the installation procedure is completed, the units are ready for
operation. To operate the BCI Mini-12GSDI units, simply apply power
as indicated in the previous step. Note that the following front panel
link status indicator, shown in Table 2 will be activated.
4.0 MAINTENANCE AND TROUBLESHOOTING
4.1 Maintenance
There is no operator maintenance other then keeping the
units clean. However, observe the following light indicators to
make sure that the unit is working properly:
PWR (TX)
OPT (TX)
This BLUE LED is on when the Mini-12GSDI-T unit has been
powered properly.
This WHITE LED is on when laser output is activated. This
also indicates SDI video signal is presented.
PWR (RX)
This BLUE LED is on when the Mini-12GSDI-R has
been powered properly.
OPT-LEVEL
This WHITE LED indicates the received optical power
level.
Table 2
Status Indicators
