___________________________________________________________________
Bro-Tek Thumb
____________________________________________________ _________
Save these
Instructions/Safety Manual
owner/operator/installer
D.
Push the two plates away from the bucket, until the bolts snug
up against the boom. Tighten the 3 or 4 bolts snug.
Install the arm with the connect link that
is preassemble with the two pins with the
linch pins and bolts.
E.
Try the rear pins with the connecting link in all of the
three positions and also fold up the thumb.
F.
If the pins does not fit. The plates are probably not squared
up. Move the plates a small amount. Once all of the pins fit
in the position. Torque the nuts at the 25 lb-ft rating, in a
crisscross pattern, while always checking the pins for free
movement.