10
CHAPTER 3:
If Your CO Alarm Alarms
WARNING!
Actuation of your CO alarm indicates the
presence of carbon monoxide (CO) which
can KILL YOU. In other words, when your
CO Alarm alarms, you must not ignore it!
If the Alarm Signal Sounds:
1. Operate the Test/Silence button. Write down
the numbers on the Digital Display and the
current time.
2. Call your emergency services, fire
department or 911. Write down the number
of your local emergency service here:
3. Immediately move to fresh air—outdoors or
by an open door or window. Do a head
count to check that all persons are
accounted for. Do not re-enter the premises,
or move away from the open door or
window until the emergency services
responder has arrived, the premises have
been aired out, and your CO alarm remains
in its normal condition.
4. After following steps 1-3, if your CO alarm
reactivates within a 24-hour period, repeat
steps 1-3 and call a qualified appliance
technician to investigate for sources of CO
from fuel-burning equipment and appliances,
and inspect for proper operation of this
equipment. If problems are identified during
this inspection have the equipment serviced
immediately. Note any combustion
equipment not inspected by the technician,
and consult the manufacturers’ instructions,
or contact the manufacturers directly, for
more information about CO safety and this
equipment. Make sure that motor vehicles
are not, and have not, been operating in an
attached garage or adjacent to the residence.
Write down the number of a qualified
appliance technician here:
_______________________________________
Finding the Source of CO
After an Alarm
Because CO may dissipate by the time an
investigator arrives, it may be difficult to locate
the source of CO. See Chapter 5 “What You
Must Know About CO.”
BRK Brands, Inc.
shall not be obligated to pay for any carbon
monoxide investigation or service call.
“ALARM-MOVE
TO FRESH AIR”
If you hear the alarm horn
and the red light is
flashing, move everyone
to a source of fresh air. DO
NOT unplug the CO Alarm!
