Brizo TempAssure Thermostatic MultiChoice T75580 Installation Instructions Manual Download Page 2

101652   Rev. A

2

Cleaning and Care  

Care should be given to the cleaning 

of this product. Although its finish is 

extremely durable, it can be damaged by 

harsh abrasives or polish. To clean, simply 

wipe gently with a damp cloth and blot dry 

with a soft towel.

www.brizo.com

Parts and Finish.

 All parts (other than electronic parts and batteries) and finishes of this Brizo

®

 faucet are warranted to the 

original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer pur-

chaser owns the home in which the faucet was first installed or, for commercial users, the warranty period is ten (10) years for 

multi-family residential (apartments and condominiums and five (5) years for all other commercial uses, in each case from the 

date of purchase.

Electronic Parts and Batteries (if applicable). 

Electronic parts (other than batteries), if any, of this Brizo

®

 faucet are warranted 

to the original consumer purchaser to be free from defects in material and workmanship for five (5) years from the date of pur-

chase or, for commercial users, for one (1) year from the date of purchase. No warranty is provided on batteries.

What We Will Do.

 Brizo Kitchen & Bath Company will repair or replace, free of charge, during the applicable warranty period 

(as described above), any part or finish that proves defective in material and/or workmanship under normal installation, use 

and service.  If repair or replacement is not practical, Brizo Kitchen & Bath Company may elect to refund the purchase price in 

exchange for the return of the product. 

These are your exclusive remedies.

What Is Not Covered.

 Any labor charges incurred by the purchaser to repair, replace, install or remove this product are not 

covered by this warranty. Brizo Kitchen & Bath Company shall not be liable for any damage to the product resulting from rea-

sonable wear and tear, outdoor use, misuse (including use of the product for an unintended application), freezing water, abuse, 

neglect or improper or incorrectly performed installation, maintenance or repair, including failure to follow the applicable care and 

cleaning instructions. Brizo Kitchen & Bath Company recommends using a professional plumber for all installation and repair of 

faucets. We also recommend that you use only genuine Brizo® replacement parts.

What You Must Do To Obtain Warranty Service or Replacement Parts.

 A warranty claim may be made and replacement 

parts may be obtained by calling 1-877-345-BRIZO (2749) or by contacting us by mail or online as follows (please include your 

model number and date of purchase):

In the United States and Mexico:

  

In Canada:

Brizo Kitchen & Bath Company 

 

Masco Canada Limited, Plumbing Group

Brizo Customer Solutions   

 

Technical Service Centre

55 E. 111th Street  

 

 

350 South Edgeware Road

Indianapolis, IN 46280 

 

 

St. Thomas, Ontario, Canada N5P 4L1

https://www.brizo.com/customer-support/contact-us https://www.brizo.com/customer-support/contact-us 

Proof of purchase (original sales receipt) from the original purchaser must be made available to Brizo Kitchen & Bath Company 

for all warranty claims unless the purchaser has registered the product with Brizo Kitchen & Bath Company. This warranty 

applies only to Brizo® faucets installed in the United States of America, Canada and Mexico.

Limitation on Duration of Implied Warranties.

 TO THE EXTENT PERMITTED BY LAW, ANY IMPLIED WARRANTY, 

INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, 

IS LIMITED TO THE STATUTORY PERIOD OR THE DURATION OF THIS WARRANTY, WHICHEVER IS SHORTER. Some 

states/provinces do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.

Limitation of Special, Incidental or Consequential Damages.

 BRIZO KITCHEN & BATH COMPANY SHALL NOT BE 

LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, 

REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR 

IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE. BRIZO KITCHEN & BATH COMPANY SHALL 

NOT BE LIABLE FOR ANY DAMAGE TO THE FAUCET RESULTING FROM REASONABLE WEAR AND TEAR, OUTDOOR 

USE, MISUSE (INCLUDING USE OF THE PRODUCT FOR AN UNINTENDED APPLICATION, FREEZING WATER, ABUSE, 

NEGLECT OR IMPROPER OR INCORRECTLY PERFORMED INSTALLATION, MAINTENANCE OR REPAIR, INCLUDING 

FAILURE TO FOLLOW THE APPLICABLE INSTALLATION, CARE AND CLEANING INSTRUCTIONS. Some states/provinces 

do not allow the exclusion or limitation of special, incidental or consequential damages, so the above limitations and exclusions 

may not apply to you. Notice to residents of the State of New Jersey: The provisions of this warranty, including its limitations, 

are intended to apply to the fullest extent permitted by the laws of the State of New Jersey.

Additional Rights.

 This warranty gives you special legal rights, and you may also have other rights which vary from state/

province to state/province.

This is Brizo Kitchen & Bath Company’s exclusive written warranty and the warranty is not transferable.

If you have any questions or concerns regarding our warranty, please contact us as provided above or visit our website at 

www.brizo.com.

Limited Warranty on Brizo

®

 Faucets

© 2018

Summary of Contents for TempAssure Thermostatic MultiChoice T75580

























Reviews: