Brivo ACS100 Installation Manual Download Page 3

Page: 3 / 16

P-MAN-PUB-Brivo ACS100 Installation Manual

Brivo ACS100 Installation Manual

UL294/ULC Listing Compliancy

UL294 Peformance Levels

Model

Number

Access Control

Line Security

Level

Destructive

Attack Level

Endurance

Level

Stand-by

Power Level

Conditions

Brivo ACS100-E

(all three

form factors)

Level 1

N/A

Parts and Service

The ACS100 controller (part numbers listed below) contains no user serviceable parts.

ACS100 Part Numbers

B-ACS100-E-BSPM-B

Mullion, Tri-Tech, Black

B-ACS100-E-BSPM-W

Mullion, Tri-Tech, White

B-ACS100-E-BSPS-B

Single-Gang, Tri-Tech, Black

B-ACS100-E-BSPS-W

Single-Gang, Tri-Tech, White

B-ACS100-E-BSPK-B

Keypad, Tri-Tech, Black

B-ACS100-E-BSPK-W

Keypad, Tri-Tech, White

B-ACS100-E-BSM-B

Mullion, Dual-Tech, Black

B-ACS100-E-BSM-W

Mullion, Dual-Tech, White

B-ACS100-E-BSS-B

Single-Gang, Dual-Tech, Black

B-ACS100-E-BSS-W

Single-Gang, Dual-Tech, White

B-ACS100-E-BSK-B

Keypad, Dual-Tech, Black

B-ACS100-E-BSK-W

Keypad, Dual-Tech, White

Documentation Disclaimer and Restrictions

Information in this document is subject to change without notice and does not represent a commitment on the part

of Brivo Systems LLC. For the most up-to-date information, visit www.brivo.com.

This document and the data herein shall not be duplicated, used or disclosed to others for procurement or manu-

facturing, except as authorized with the written permission of Brivo Systems LLC. The information contained within

this document or within the product itself is considered the exclusive property of Brivo Systems LLC. All information

in this document or within the hardware and software product themselves is protected by the copyright and/or

other intellectual property laws of the United States.

Product Support

All support for this product is provided by the third-party dealer. Please contact the dealer who installed the prod-

uct with questions and support requests.

Brivo® is a trademark of Brivo Systems LLC. Brivo Systems LLC., 7700 Old Georgetown Road, Suite 300, Bethesda,

MD 20814

Summary of Contents for ACS100

















Search results

Summary of Contents for ACS100

Reviews:

Brivo ACS100, Installation Manual, Page: 3 / 16

Search results

Summary of Contents for ACS100

Reviews: