Britton Bath&Change, User Manual

Page: 8 / 21

6
Assembling
2.
Unpack the changing unit carefully and unwrap each part taking care not to
lose the plastic bag of small items. Check the contents against the list of parts.
Attach the two side frames (3) to left side panel (1) by inserting bolts (10) through
the holes in the side panel and tightening into the threaded ends of the side
frames using the supplied tool (13). Attach the right hand side panel (2) in the
same fashion.
3.
Turn the changing unit on its side as shown and attach the padded top (4),
insert two bolts into the tubing of the frame of the padded top, before fully
tightening the bolts, slip the elastic loops of the mesh basket (14) over the bolts
heads then tighten. Carefully turn the changing unit over and secure the
opposite side with two more bolts.
4.
Attach the wheels (9) to all four corners of the changing unit, pushing the
wheels firmly into place along the slots provided.
NOTE: Ensure the wheels are locked when using the changing unit.
5.
Attach the base shelf (5) by placing the shelf in position then securing with
flaps (A) wrapped around the uprights of the two side frames (3) and with flaps
(B) wrapped around and under the bottom of the frames.
6.
Attach the utility holders (8) by hooking them over the front of the support
frame for the padded top (4). Attach the pan trays (7) by hooking each tray over
the tops of the two side frames (3) as shown. Finally the bath (6) can be placed in
the top of the changing unit.
Using bath
Britton Bath&Change changing unit’s bath tube comes complete with a handy
drainage hose (11) which can be attached to the outlet on the underside of the
bath.
Before placing water in the bath ensure the plug (12) is firmly located in the plug
hole on the inside of the bath.
NOTE: When using the bath, care should be taken that the water is of the suitable
safe temperature before placing the child in. Do not use the bath without the
frame.
Always apply studs (15) while changin mat is hanging.
Complies with BS EN 12221:2008.
Importer: Speli Baltic OÜ, Tallinn. Tel. +372 6700623; info@speli.ee