British Fires EF40-63B, Installation & User'S Instructions

Page: 24 / 48

8)
Install the appliance onto the mounting bracket on
the wall. Then mark with a pencil through the hole in
the end of the suite fixing brackets against the wall.
9)
Remove the appliance off of the wall.
10)
Drill a
5
/
16
in. wide and 2 in. deep (8 mm wide x 50 mm
deep) on either side of the appliance.
Please note: Before drilling into walls,always check
that there are no hidden wires, pipes, etc. Make
sure that screws and wall plugs supplied are
suitable for supporting the unit in your surface.
Consult a qualified person if you are not sure.
11)
Tap the two wall anchors into the pre-drilled holes with
a hammer until they are flush with the wall.
12) Install the appliance back onto the wall mounting
bracket.
13)
Then screw the wall screws through the rear of the
suite fixing brackets and into the wall plugs.
14) Carefully slide the bottom of the suite onto the suite
fixing brackets.
15)
Screw the two legs of the suite from the rear onto the
back of the top section of the suite as shown, left.
16)
Carefully lower the top section of the surround onto the
top of the firebox.
⁵ / 16 in.
2 in.
50 mm
8 mm
//
21