ENGLISH
OPERATION MANUAL
BRITEQ
®
3/30
WIRELESS DMX SYSTEM
FUNCTIONS
1. ANTENNA
2. SETUP BUTTON:
used to connect / disconnect the wireless link between units, different functionality for
the transmitter and receiver:
WT-DMXG4
– Transmitter:
Start connection procedure:
press the setup button shortly.
All receivers that are currently not connected to a transmitter will be automatically connected.
All receivers already connected to the transmitter start blinking (status led) together with the
status led on the transmitter.
Disconnect ALL receivers:
press the setup button for +/-5sec, the status led turns off and all
connected receivers will be disconnected.
WR-DMXG4
– Receiver:
Disconnect the receiver:
press the setup button for +/-5sec, the status led turns off and the
receiver will be disconnected from the transmitter. The receiver is ready to make a new connection
with a transmitter.
3. STATUS LED:
shows the status of the wireless connection.
WT-DMXG4
– Transmitter:
LED on / slow blinking:
the unit is on an sending.
LED blinking fast:
the transmitter is sending the connection request signal to the receivers.
All receivers that are currently not connected to a transmitter will be automatically connected.
All receivers already connected to the transmitter start blinking (status led) together with the
status led on the transmitter.
WR-DMXG4
– Receiver:
LED on:
the unit is connected to a receiver.
LED off:
the unit is not connected to a transmitter and ready to receive a connection request signal
from a transmitter.
LED blinking fast:
the receiver receives a connection request signal, two possibilities:
The receiver is currently not connected to a transmitter: it will be automatically connected.
The receiver is already connected to the transmitter that sends the connection request signal:
status led blinks together with the status led on the transmitter to indicate that both are
connected.
4. POWER SWITCH:
Used to switch the unit ON or OFF
5. SAFETY EYE:
used to attach a safety cable when the unit is rigged (see paragraph “overhead rigging”)
CONNECTIONS WT-DMXG4 TRANSMITTER