ENGLISH
OPERATION MANUAL
BRITEQ
®
6/6
RICO-V4
MAINTENANCE
DANGER TO LIFE:
Switch the unit off and unplug the mains cable BEFORE servicing!
During inspection the following points should be checked:
•
All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
•
Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
•
The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
•
Clean with a soft cloth using normal glass cleaning products.
•
Always dry the parts carefully.
•
The unit and its installation conditions should be inspected and approved every 3 months by an authorized
expert!
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
SPECIFICATIONS
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
Power Input:
IEC60309-standard, CEE-32A industrial plug
400Vac 50/60Hz, 3phase, 5wire (3P+N+E)
Maximum overall power:
32A / phase
Output channels:
4x CEE 4pole 16A
Aux output:
240Vac / 16A
Protection class:
class I (only to be connected to class I outlets)
Automatic fuses / phase:
2x C16 (I
n
=16A, instantaneous tripping current = 5x I
n
)
Diameter Power cord:
5x 6mm
²
(H07RN-F 5G6)
Size:
19
”
/ 4U (482x184x374mm without connectors / buttons)
see drawings
Weight:
15 kg
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.briteq-lighting.com
