ENGLISH
OPERATION MANUAL
BRITEQ
®
4/20
DS12
OVERHEAD RIGGING
You can use the M10 thread on the top of the DS12 box to fix a rigging hook.
•
Important:
The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
should be used, the installed device should be inspected regularly for safety.
•
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
•
The device should be installed out of reach of people and outside areas where persons may walk by or be
seated.
•
Before rigging make sure that the installation area can hold a minimum point load of 10times the device’s
weight.
•
Always use a certified safety cable that can hold 12times the weight of the device when installing the unit.
This secondary safety attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
•
The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
•
The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
SPECIFICATIONS
Power Input:
AC100~240V / 50Hz.
Fuse:
250V 10A slow blow (20mm glass)
Max. Total Output Power:
Max.10A over both outputs together
DMX input:
3pin or 5pin XLR
DMX outputs:
3pin XLR
Size:
130 x 132 x 56mm
Weight:
0,780kg
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com