ENGLISH
USER MANUAL
BRITEQ
®
5/41
COB BLINDER 2X100W
HOW TO SETUP:
MAIN MENU:
To select any of the menu options, press the
MODE
button until the option is shown on the display.
Select the function with the
ENTER
button. The display will blink.
Use
DOWN
and
UP
button to choose the desired menu option.
Once the required menu option is selected, press the
ENTER
button to select.
DMX ADDR
Used to set the desired DMX-address.
Press the MODE button until the desired
function is showing on the display.
Press the ENTER button: the values can
be changed
Use DOWN and UP buttons to select the
desired DMX512 address. The last
occupied DMX-address is also shown:
makes it easier to set the address of the
next unit in the chain.
Once the correct address shows on the
display, press the ENTER button to save
it.
CH. MODE
Used to set the desired channel mode.
Press the MODE button until the desired
function is showing on the display.
Press the ENTER button: the values can
be changed
Use DOWN and UP buttons to select the
desired mode:
CH:01
master dimmer
CH:02
master dimmer
CH:04
dimmer
projector
1
+
projector 2 + dimmer curve
Once the correct option shows on the
display, press the ENTER button to save
it.
SLAVE MODE
Used to set the projector as slave in a
master/slave setup.
Press the MODE button until SLAVE
MODE is showing on the display.
DIM PIX1 / DIM PIX2
Used to set the master dimmer while used as master.
Press the
MODE
button until
DIM PIX1
(dimmer channel 1) is shown on the display.
Press the
ENTER
button to select.
Use
DOWN
and
UP
buttons to change the intensity of the projector.
Press the
ENTER
button to confirm your setting and to go to
DIM PIX2
(dimmer channel 2).
Use
DOWN
and
UP
buttons to change the intensity of the second projector.
Press the
ENTER
button to confirm.
Note:
the setting of this option has NO effect while the projector is used as SLAVE or in DMX-mode.
DIMMER CURVE
Used to set the dimmer curve of the master dimmer.
Press the MODE button until the desired function is showing on the display.
Press the ENTER button: the values can be changed
