ENGLISH
OPERATION MANUAL
BRITEQ
®
12/23
BTX-TITAN
INFORMATION
FIXTURE TIMES
Shows the operation time (in hours) since it first start.
INFORMATION
LAMP TIMES
Lamp on times:
Show the total hours with lamp on since it first start
Lamp strikes:
Show the total count of lamp strike since it first start
Reset lamp time:
Reset the total hours with lamp on since it first start.
Should be done after changing the bulb.
INFORMATION
ERROR LIST
If an error is detected, a list of error(s) will appear here.
By default, without any error: “no error”.
INFORMATION
DIAGNOSIS
Show the state of each cards. If one of the electronic card is not at 100%, contact the technical support.
INFORMATION
FAN MONITOR
Shows the rotation speed of the fans. Speed in rotations per minute.
INFORMATION
DMX VALUE
Shows the DMX value received by the Briteq BTX-TITAN on the DMX input. It can be used as a DMX
analyzer to check the values received.
PERSONALITY
LAMP
Power on light (on
– off):
On:
Turn the lamp on at power on.
Off:
The lamp has to be switched on using the local menu or DMX.
Lamp on by DMX (on
– off):
On:
lamp can be switched on by DMX.
Off:
lamp cannot be switched on by DMX.
Lamp on delay (0-60min):
The lamp is automatically switched on 0-60min after the projector was switched on. Delayed start can be
useful in permanent installation.
PERSONALITY
PAN TILT
Pan reverse (on-off)
On:
Pan works in opposite direction
Off:
Pan works normally
Tilt reverse (on-off)
On:
Tilt works in opposite direction
Off:
Tilt works normally
Feedback (on-off)
On:
pan/tilt position is automatically corrected.
Off:
pan/tilt position is not corrected.
PERSONALITY
DMX INPUT
Used to set the desired input for the DMX signal:
Wired Input:
XLR (3 or 5pin) input is used.
Wireless Input:
DMX-signal comes from an external wireless transmitter (sold separately)
Wireless Input / XLR out:
DMX-signal comes from an external wireless transmitter (sold separately).
The wireless DMX-signal is also available at the DMX output port (3 or 5 pins) for further daisy chaining
of other equipment.
Important Remark:
originally this projector is NOT equipped with a wireless receiver module. A wireless
receiver module is optionally available.
