ENGLISH
OPERATION MANUAL
BRITEQ
®
10/78
BTX-BEAM 2R
Contrast Ratio
Select
Contrast ratio
, press
ENTER
button to confirm, current mode will blink on the display, use
UP
and
DOWN
buttons to adjust contrast ratio from
1
(low) to
30
(high), press
ENTER
button to store. Press the
MENU
button to go back to the last menu, if you leave the unit unused for one minute it will automatically exit
from menu mode.
Temperature Unit
Select
Temperature Unit
, press
ENTER
button to confirm, current mode will blink on the display, use
UP
and
DOWN
buttons to select
C°
or
F°
, press
ENTER
button to store. Press the
MENU
button to go back to
the last menu, if you leave the unit unused for one minute it will automatically exit from menu mode.
Display Warning
Select
Display Warning
, press
ENTER
button to confirm, current mode will blink on the display, use
UP
and
DOWN
buttons to select
No
(display does not show the warning when the unit goes wrong) or
Yes
(display
will show the warning when unit goes wrong), press
ENTER
button to store. Press the
MENU
button to go
back to the last menu, if you leave the unit unused for one minute it will automatically exit from menu mode.
Fixture Test
Enter menu mode, select
Fixture Test
, press
ENTER
button to confirm, use
UP
and
DOWN
buttons to select
Auto Test
or
Manual Test
Auto Test
Select
Auto Test
, press
ENTER
button to
confirm, the unit will run built-in programs to
automatically test pan, tilt, color, gobo, gobo
rotation, shutter, dimmer, prism, prism rotation,
frost, focus,
and lamp on/off. Press
MENU
button
back to the last menu or exit menu mode after
auto test.
Manual Test
Select
Manual Test
, press
ENTER
button to
confirm, the current channel will show on the
display, use Up and
DOWN
buttons to select
channel, press
ENTER
button to confirm, then
use
UP
and
DOWN
buttons to adjust the value,
press
ENTER
button to store, the fixture will run
as the channel value indicates. Press the
MENU
button to go back to the last menu, if you leave
the unit unused for one minute it will
automatically exit from menu mode. (All channel
values will become 0 after exiting Manual Test
menu)
Fixture Information
Enter menu mode, select
Fixture Information
, press
ENTER
button to confirm, use
UP
and
DOWN
buttons
to select
Fixture Use Time, Lamp On Time
or
Firmware Version.
Fixture Use Time
Select
Fixture Use Time
, press
ENTER
button to confirm, fixture use time will show on the display, press
MENU
button to exit.
Lamp On Time
Select
Lamp On Time
, press
ENTER
button to confirm, lamp on time will show on the display, press
ENTER
button to confirm, use
UP
and
DOWN
buttons to select
Exit
or
Reset Time
, press
ENTER
button to confirm.
Press the
MENU
button to go back to the last menu, if you leave the unit unused for one minute it will
automatically exit from menu mode.
Firmware Version
